Viper E 17HDP-EU, Руководство пользователя

Страница: 10 / 12

10 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309EU (1) – 2012-04-10
ENGLISH USER MANUAL
socket insert translation black insert translation
Handle Cord insert translation red insert translation
Motor Cord insert translation white insert translation
running Capacitor insert translation orange insert translation
starting Capacitor insert translation yellow insert translation
green insert translation
OPErATION
BEFOrE STArTINg THE MACHINE
ASSEMBLy
For transport reasons the motor head and shaft are supplied not assembled.
insert the gear index housing (1) into the “U” shape bracket (2).
align the holes of the gear index housing and the “U” shape bracket.
insert the socket screws into the holes of the “U” shape bracket and then tighten the screws.
wind the power cord around the handle and the power cord hook.
TrANSPOrT
place the handle in the upright position, grasp the handle with both hands and tip the machine until
it stands on the two wheels (1).
wheel the machine to where it is needed.
BASIC OPErATION
remove any obstructions or other obstacles in the area which is to be cleaned.
Place the handle in the upright position and tilt machine back until handle rests on the floor.
notE
be sure the machine is not plugged into an outlet.
attach the pad driver or brush to the machine by placing the clutch plate over the gearbox hub
and turning the driver / brush 1/4 turn.
place machine back into its upright position.
plug power cord into a grounded outlet.
notE
never use an extension cord in conjunction with the standard power cord.
the handle height may be adjusted by pulling the adjustment lever (1) and lower the shaft (2)
into its cleaning position.
to start the machine, press the red safety button (3) on the top of the upper switch housing
,and then squeeze either of the operating triggers(4/5) the safety button (3) must be de-
pressed prior to squeezing the operating triggers (4/5).