Viper 791 XV, Руководство по установке

Страница: 35 / 58

© 2005 Directed Electronics, Inc. Vista, CA
3 35 5
3. SSeelleecctt tth hee rreecceeiivveerr cch haan nn neell.. Press and release the Valet/Program switch the number of
times necessary to access the desired channel. Once you have selected a channel, press
and H HO OLLD D the Valet/Program switch once more. The siren will chirp and the LED will blink
the number of times corresponding to the channel that has been accessed.
N NO OTTEE:: If adding a remote, a button must be taught to the unit in the Channel One or Channel
Five position prior to programming other channels.
CCh haan nn neellss TTw wo o,, TTh hrreeee aan nd d N Niin nee:: Channels Two through Nine are used to assign the arm, disarm and panic func-
tions to separate buttons on the remote control. Teaching a button to Channel Two erases all information about
that remote from memory. Any auxiliary functions that are desired will have to be reprogrammed. Similarly, if the
remote is set up to use the separate arm, disarm and panic channels and a button from that remote is entered
into Channel Two, the remote will be erased from memory, and the system will only recognize the button that
was entered into Channel Two.
CCh haan nn neell TTw weellvvee:: If any transmitter button from a known transmitter is programmed to Channel Twelve, all trans-
mitters will be erased from memory and will revert to the default feature settings. (See
Features Menu section of
this guide.) This is useful in cases when one of the customer's transmitters is lost or stolen. This will erase any
lost or stolen transmitters from the system's memory. It can also be used to start from scratch if the transmitter
buttons were programmed incorrectly.
4. P Prreessss tth hee ttrraan nssm miitttteerr b bu utttto on n.. While H HO OLLD DIIN NG G the Valet/Program switch, press the button
from the transmitter that you wish to assign to that channel. The unit will chirp indicat-
ing successful programming. It is not possible to teach a transmitter button to the system
CCH HA AN NN NEELL N NU UM MB BEER R FFU UN NCCTTIIO ON N W WIIR REE CCO OLLO OR R
1 Auto Learn Standard Configuration*
* (default)
2 Arm only
3 Disarm only
4 Silent Mode™/Remote Valet/Trunk Release RED/WHITE
5 Remote Start
6 Channel 4 VIOLET/BLACK
7 Channel 5 WHITE/BLACK
8 Short Run/Turbo
9 Timer Mode
10 Arm/Disarm/Panic
11 Panic only
12 Delete all transmitters
* *N NO OTTEE:: For Auto Learn Configurations, see Transmitter Configurations section of this
guide.