Viper 5706V, Руководство пользователя

Страница: 50 / 68

46 © 2016 Directed. All rights reserved. 46
Button Auto Lock
When ON, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked, a
fault tone is emitted. To unlock the buttons;
press
the button followed
by the button, the buttons unlock and tones play to confirm.
Note
: If the button beeps have been turned OFF on the 1-way remote
control, then the remote will not respond to any button presses other
than the unlocking sequence. It is recommended to keep the button
press beeps programmed ON.
Car Select
Car 2 must first be turned ON (see Remote Features Menu under
“1-way Remote Control Configuration” on page 47 to turn ON).
1.
Press
and
hold
the button for three seconds. The remote flash-
es the LED and beeps once or twice to indicate the selected Car
is 1 or 2.
2.
Release
the button, then
press
and
release
while the LED and
beeps continue to perform Car Select. Once the car is selected
a command can be performed by pressing one of the command
buttons.
Note
: If the button is held for 12 seconds, the remote will enter the
remote configuration mode.