background image

45

© 2016 Directed. All rights reserved.

1-W

ay

45

1-Way Companion Remote Control

Button

Level

Direct Access

x 1

LEVEL 1

x 2

LEVEL 2

x 3

LEVEL 3

x 4

LEVEL 4

Arm/Lock

(Panic)

Silent Arm

Sensor 

Bypass

Sensor Silent 

Arm

Full Silent 

Arm

Disarm/

Unlock 

Silent Disarm

Remote Valet  Car Finder

Remote Start

Runtime 

Reset

Timer Start

Smart Start

Defogger

A U 

X

AUX/Trunk

AUX 1

AUX 2

AUX 3

AUX 4

Not Used 

Used to access function levels for Advanced Commands 

(  with multiplier in top row implies button presses) 

 

Using the 1-Way Companion Remote

The companion 1-way remote commands the system features as 
shown in the previous table, but without the message display of the 
Responder LC remote. Siren chirps and parking light flashes are used 
to indicate that a command has been received and activated as de-
scribed in the 

Basic

 and 

Advanced Command

 sections.

Accessing Commands

Similar to the Responder LC remote, Basic commands are performed 
when a command button is pressed directly. To perform Advanced 
Commands 

press

 the 

button one to four times to access function 

levels, 

x4 in the table for example implies pressing 

 four times. 

The LED flashes in groups for a few seconds to indicate the level. 

Press

 

the desired command button while the LED is flashing to perform the 
command.

Содержание 5706V





































































Отзывы: