10
©
2005
Directed Electronics, Inc. all rights reserved
Connect the BLACK Ground wire and H1/2 BLACK ground wire to separate ground locations
using a factory bolt that does NOT have any vehicle component grounds attached to it or drill a
new hole if required. A screw should only be used in conjunction with a two-sided lock washer.
Under dash brackets and door sheet metal are not acceptable ground points.
Connect the BLACK +12V power supply wire to an unfused source at the vehicle’s fusebox. Use the
supplied fuse holder and a 15 amp fuse.
Auxiliary Harness Wire Connection Guide
Auxiliary Harness Wiring Diagram
___
___
___
___
___
___
Auxiliary Harness Wiring Instructions
H2/1 LIGHT BLUE (-) second unlock output (200mA)
This wire produces a (-) 200mA output for vehicles with progressive/selective door unlock, where
the driver’s door unlocks first and the remaining doors unlock with a second press of the unlock
button.
LIGHT GREEN/BLACK
(-) Factory Disarm Output
VIOLET/BLACK
(-) Channel 4 Output
WHITE/BLACK
(-) Channel 5 Output
GREY/BLACK
(-) Channel 6 Output
ORANGE/BLACK
Retained Accessory Output
LIGHT BLUE
(-) Second Unlock
H2/1
H2/2
H2/3
H2/4
H2/5
H2/6
NOTE:
Remove all tags from pigtail harness wires after installation.
