Viper 300 ESP, Руководство пользователя

Страница: 7 / 13

1. In the edition channels screen,press "SAT" in the remote control.
2. The cursor will jump to the title at the top of window.
3. Press to select the desired one from the stored
satellites.The channel list will show all programs under the
current satellite.
4. Press OK to go back the channel list.
1.2 Add Channel
In the Channel menu,select the option Add channel and press OK.
Satellite: Press OK to display the satellite list.Select the satellite
you want to check with pressing .You can also press
to select the satellite.
TP: Transponder,select the desired one from the pre-program options.
TP Frequency: Input the value by using the numeric keys.
Symbol rate: Symbol rate of the current transponder
Polarization: Vertical or Horizontal polarization.
Search: select the desired mode for searching.
Edit Satellite:
(1). Satellite:Press OK to display the satellite list.Selet the
satellite you want to check with pressing .You can also
press to select the satellite.
(2). LNB Type: Select proper LNB type using the arrow keys
according to your physical LNB type.
(3). LNB Freq(1,2): Enter the proper LNB frequency referring
to your LNB using the numeric keys on the Keypad.
(4). LNB Power: Select the desired option,If your STB is
connected to another receiver through LOOP THROUGH
support ,you should check which receiver is connected directly
to the LNB.In case the other receiver is directly connected
to the LNB, the select OFF.
(5). 22K: 22KHz control is automatically set for each LNB
alternative.If "universal" is selected,22KHz control should be
"off state".
(6). DiSEqC: Select the port number to get the RF signal
from the LNB ,which is connected, to DiSEqC switching box.
(7). Positioner: Satellite position. If your antenna is potitioned
incorrectly,you will not receiver signal from the satellite.So
USER’S MANUAL
11
digital satellite meter
12
THE PROFESSIO NAL EQUIPMENT
digital satellite meter
USER’S MANUAL