USER’S MANUAL
05
digital satellite meter
06
THE PROFESSIO NAL EQUIPMENT
digital satellite meter
C.The Menu Operation
Once you have installed and connected the cables of the
receiver,press menu key on the Keypad to display the Main
Menu.
This menu consists of 4 menu options as shown below.
*
Channel
*
Installation
*
System
*
Tools
Use the keys to move the cursor up or down in the
menu.Use the OK key to confirms a selection.
To escape the menu system at anytime,press EXIT key.
1. Channel
If there are some programs stroed in the receiver,user can
press OK enter the menu.
1.1 TV Channel
You can manage the stored channels,TV and radio channels,
deleting,shorting,locking,skipping,them very easily.
Access to the editing channels menu,through the main menu:
1. Press MENU to enter the main menu.
2. The option Channel will be highlighted.
3. Select TV Channel to manege the TV channels,or Radio
USER’S MANUAL
B.Quick operation guide
Connect with dish, then turn on the meter and go to the menu
setting
B1. If there is not desired channel list in the meter, go on the
next step, otherwise direly to the step B2.
(1) Press Menu button to display main menu, go to the
Channel sub menu and select the option Add Channel and
press OK. Use or to select "edit satellite" then setting
the LNB. Press exit or menu button back to the previous
menu. If already there are useful transponder in the meter,
please use or to select it to be parameters as desired
when you adjusting the dish. If there is not presetting
transponder in the meter, please go the "Add TP" menu to
add the TP frequency, symbol rate and polarity.
(2) Adjusting the antenna Azimuth and elevation according
the signal intensity and signal quality which are showed in
the meter. Stop to adjust the antenna when signal quality to
be max value (attention: when you start to adjust the antenna,
please set the signal intensity to be max value)
B2. If there are desired channels in the meter, please select
this channel and press info key in the keypad to show the
information of the current channel, including the signal strength
and signal quality of this transponder, then please adjust the
antenna according to the step 2 of B1 ( before this step,
please make sure the LNB frequency is correct, otherwise,
we suggest you adjust the antenna according the step B1)
Содержание 300 ESP
Страница 1: ...USER S MANUAL THE PROFESSIONAL EQUIPMENT...
