Using the Printer
37
2. When you finish creating the new document, from the
File
menu, select
Page Setup
. On the
Layout
tab, set margins of 1.5 mm (0.06”) all around.
Figure 5
Page Setup
3. Lay out the label as shown in
Figure 2
, avoiding the margins.
Using Other Graphics Software
To design and print full-bleed labels using other graphics software, follow the same
workflow.
1. Define a custom size that is 3 mm (0.12”) longer and wider than the actual label.
2. Set margins of 1.5 mm (0.06”), and lay out the design within the margins.
3. When printing, select the correct media size.