VIPA TM-E 900-1E640, Руководство пользователя, Страница: 22 / 68

Chapter 2 Hardware description Manual VIPA TM-E
2-4 HB39E - TME - RE_900-1E640 - Rev. 09/11
You may connect your TM-E module to Ethernet by the RJ45 interface. Via
Ethernet the integrated Web page of the TM-E module may be accessed
for according configurations. The interface is automatically adapting to the
transfer rate 10 or 100Mbit/s
The jack has the following assignment:
8-pole RJ45 jack:
Pin Assignment
1 Transmit +
2 Transmit -
3 Receive +
4 -
5 -
6 Receive
-
7 -
1
2
3
4
5
6
7
8
8 -
Connect your PC to your TM-E module via Ethernet. Here either a crossed
cable or a switch may be used.
An active link via Ethernet is shown by the TM-E module with the green
"LINK" led.
The TM-E module is delivered with the following IP address parameters:
IP address: 10.0.0.53
Subnet mask: 255.255.255.0
To change the IP address parameters the configuration tool "eBuddy" from
VIPA may be used.
There is an PSTN modem (analog) integrated to the TM-E module. PSTN
means the analog
P ublic S witched T elephone N etwork. The connection to
your telephone line happens by the RJ11 interface.
The "Line" interface has the following assignment:
6-pole RJ11 jack:
Pin Assignment
1 -
2 -
3 Tip
4 Ring
5 -
1
2
3
4
5
6
6 -
RJ45 Ethernet
interface
Linking to Ethernet
RJ11 interface
PSTN modem