VIPA CP 1413plus, Руководство пользователя

Страница: 63 / 328

CP1413plus manual VIPA CP1413plus network adapter
Rev. 00/07 3-23
3.1.4.2.2 OS/2 Version B with IBM LAN Requester 4.0
This installation includes the following components:
- H1 under OS/2
- IBM LAN Requester 4.0
Note you must have the IBM LAN Requester!
Step 1
Install the VIPA CP1413plus H1 network adapter as described in chapter 3.1.3.
Step 2
Boot into DOS and set any required parameters
Boot OS/2 because the following steps are applicable only to OS/2.
Step 3
Install the IBM LAN Requester 4.0 as shown below:
:
In the window "Network Adapters"
-> Other adapters (select)
Insert the disk SW83Z 1/2
-> A:\H1_OS2\MACS (enter)
The files will be copied
In the window "Network Adapters"
VIPA CP 1413plus (Znyx ZX312/V PCI Ethernet Driver) (select)
-> Add
In the window "Current Configuration"
-> Edit
enter the hardware settings
In the window "Protocols"
-> other Protocols (select)
-> A:\H1_OS2\PROTOCOL (enter)
-> OK
(the driver is copied to the hard disk)
VIPA H1 Protokoll (select)
-> Add
select any other protocol,
that must be installed.
-> OK
Step 4
Execute a system shutdown.
Restart the PC and make sure that all programs are loaded without error messages.
Note The directory A:\H1_OS2\VAR_B contains the CONFIG.SYS and PROTOCOL.INI
files of a valid installation. You may wish to refer to them if you require help.