VIPA CP 1413plus, Руководство пользователя

Страница: 56 / 328

Z'nyx PCI-bus adapter CP1413plus manual
3-16 Rev. 00/07
3.1.4.1.4 MS-DOS Version D with IBM LAN Requester 4.0
This installation includes the following components:
- H1 under MS-DOS
- IBM LAN Requester 4.0
Step 1
Install the VIPA CP1413plus H1 network adapter as described in chapter 3.1.3.
Step 2
Set the required parameters, if necessary.
Step 3
Install the IBM LAN Requester according to the instructions supplied by IBM. Next you
must please install the "ZNYX ZX312/V PCI Ethernet Driver"-adapter.
Step 4
Restart the PC. The network should operate correctly.
You can check the network function by transmitting a message to another user on the
network.
net send [name of recipient] ["Message"]
Step 5
Copy the H1 directory for Windows multi-protocol onto your hard disk.
xcopy A:\H1_DOS\VAR_D\*.* C:\H1_DOS\
Step 6
Add the lines from the file C:\H1_DOS\CONFIG.SYS to your C:\CONFIG.SYS file:
LASTDRIVE=p
device=c:\net\protman.dos /I:c:\net
device=c:\net\ndishlp.sys
device=c:\h1_dos\zx312.dos
device=c:\h1_dos\h1prot.dos
Modify any existing LASTDRIVE entry to read LASTDRIVE=P.