VIPA CP 1413plus, Руководство пользователя

Страница: 48 / 328

Z'nyx PCI-bus adapter CP1413plus manual
3-8 Rev. 00/07
3.1.4.1 MS-DOS installation
3.1.4.1.1 MS-DOS Version A without additional protocols
Installation with the following components:
- H1 under MS-DOS without additional protocols
Step 1
Install the network adapter into your PC (see chapter 3.1.3)
Step 2
Set the required parameters, if necessary.
Step 3
Copy the files from the directory \H1_DOS\VAR_A located on the disk SW83Z 1/2 to
your hard disk C: into the directory \H1_DOS:
xcopy a:\h1_dos\var_a\*.* c:\h1_dos\
Step 4
Add the following lines to your C:\CONFIG.SYS and C:\AUTOEXEC.BAT files:
additional lines in C:\AUTOEXEC.BAT
:
:
C:\H1_DOS\NETBIND
:
:
additional lines in C:\CONFIG.SYS
:
:
DEVICE=C:\H1_DOS\PROTMAN.DOS /I:C:\H1_DOS
DEVICE=C:\H1_DOS\ZX312.DOS
DEVICE=C:\H1_DOS\H1PROT.DOS
:
:
Step 5
Change the entry for NETADDRESS in section [H1PROT_NIF] of the file
C:\H1_DOS\PROTOCOL.INI.
Please ensure that the network address is unique.