9
Section 5: Wall Mounting
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. If the monitor was attached to the stand, remove the stand.
Monitor
Stand Base
Foam
Foam
Stand Stem
2. Remove the original screws x 4 (
1
) from the opening in the back of the monitor and
install the UP & DOWN
converters with the NO. 3 screws provided.
Do not discard the original screws. They are needed to secure the rear panel for the
stand installation. Refer to Section 4.
1
3. Follow the directions received with your mounting base (not included) and install the
monitor on the wall.
Mounting Base
(Not included)