14
3.3
Setup
3.3.1
MIC connection
3.4
Auto-calibration
-
Make sure
o
Speakers & Subwoofer are turned ON
o
No inputs are connected to Neo
o
Speakers are in Line of sight with Microphone
-
Turn ON Neo
-
Press the following sequence of buttons on the Remote and follow the display instructions.
Menu
OK
Up/Down till Calibrate
OK.
-
Keep complete silence
-
After a while, the number of Speakers & Subwoofer that have been powered on will be
displayed. Please confirm pressing the OK key. Else press the MENU key and redo the
Calibration.
-
After this confirmation, the Speakers & Subwoofer would generate a set of sweep sound and the
number of speakers & subwoofer will be re-checked. If during this process any Speaker or
Subwoofer is not detected it is reported. Then please redo the Calibration.
-
After this confirmation, the Speakers & Subwoofer would generate another set of sweep sound
and follows it up with a period of silence during which the system would be completely
calibrated.
-
Information about the setup (speaker location, angle and distance) would now be available to
the user. Check them. If duplicate speakers are reported (eg: 2 Front left with same parameters),
then check that the MIC cable is inserted properly and RE-CALIBRATE.
