![Violet Defense Vantage I Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/violet-defense/vantage-i/vantage-i_user-manual-and-warranty_1028892017.webp)
Each Vantage UV unit comes standard with mounting holes for standard VESA bracket. This enables
a variety of installation methods, including wire suspension and wall mounts.
1. When selecting a mounting bracket for wall-mounted deployment, the bracket should use a
100mm x 100mm VESA pattern and must be able to adequately handle the weight of the Vantage
unit (4 lbs Vantage I, 10 lbs Vantage II)
2. Attach the mounting bracket to the Vantage unit using the manufacturer-recommended
fasteners and method.
3. Secure mounting bracket to studs or using appropriate mounting hardware.
4.
When positioning unit onto bracket, ensure proper air flow and clearance and to ensure nothing
blocks or interrupts the functioning of the PIR motion sensor.
The VESA holes also allow for integration with a variety of mobile stands, such as tripods or bases
with caster-wheels. See relevant user manuals for mobile kits for additional information.
POR
TABLE DEPL
O
YMENT
© Copyright 2021 Violet Defense, LLC All Rights Reserved
VNTG-USRMNL-2021
15
WALL-MOUNTED DEPLOYMENT
INSTALLATION - HARD-CEILING
VANTAGE I WITH ADAPTER PLATE
Phillips Head Pan #6-32 x 5/16 (x4)
The Vantage units can also be used in various rooms on tabletops, desks, counter tops, etc.
1. To ensure proper stability of the unit, handle unit with care to avoid dropping and place the unit
on a flat, hard-surface away from any flammable items. It is recommended that users deploy the
Vantage I with its corresponding docking station. The unit should be positioned such that the
dock or any other items does not block the vents/fans on the unit.
2.
Position the unit to ensure proper air flow and clearance and to ensure nothing blocks or
interrupts the functioning of the PIR motion sensor.
3. When using with portable mounts, be aware of stability of the assembly. Depending on the height
and weight, verify that the combined assembly does not tip over when tilted 10 degrees in any
direction. Inspect power cables for any prior damage from rollover or stepping on. Place or tape
down power cables to prevent a trip hazard.
PORTABLE DEPLOYMENT