User’s Manual
Arctic EDGE Router
17
Viola Systems Ltd.
Setting of the IP Address Using an HTML Browser
This is the recommendable way to set up the network parameters. It is an easy-to-apply solution if the
computer used for configuration has been properly configured. Follow the procedure listed below:
1. Connect to the Arctic using your HTML browser. The default IP address of the Arctic is
“10.10.10.10” (netmask “255.0.0.0”). Note that your computer used to connect to Arctic, needs to
be in same address space (eg. IP address 10.10.10.11 for the computer). Check computer’s IP
address with ping (Windows computer current IP address can be checked with by command
ipconfig /all
in command prompt)
.
2. From the initial page click
Start Configurator
and enter login information in the following page.
Username
is
root
and by default no password is set (just leave the field empty).
3. Navigate to Network page and from there to Ethernet subpage (left menu).
4. Enter the IP address (and other network settings) of your choice and click Apply and then
Commit to store the settings. Note that usually Ethernet default router is set to zero, because either
GPRS or VPN is used as default route.
5. Reboot the Arctic for the settings to take effect.
Arctic default password is
empty
. Remember to set the password before connecting the Arctic device
to a public network.
