3. Photographing Function
In standby state, press the <MIC> button to enter
the photographing mode. Then, the icon in the
upper left of the screen is changed from a video
camera to a still camera. You can press the <OK>
button to take photos. To switch back to the video-
recording mode, press the <MIC> button and press
and hold the <OK> button for five minutes.
4. Motion Detection Function
In standby sate, press the <Menu> button to enter
the setting menu. Press the <Down> button to move
the cursor to the <Motion Detection> option, and
set its state to <On>. Press the <REC> button to
enter the motion detection mode. If the lens senses a
moving object peripherally, the data recorder enters
the video recording state. If the lens does not sense
any moving object within 60 seconds, the data
recorder stops video recording. To exit the motion
detection mode, enter the menu again, and set the
state of the <Motion Detection> option to <Off>.
-9-
Operation Guide
[Prompt]
If you need to use the motion detection function
for a long period, purchase portable power supply
separately.
