VIO 7 Vio, Инструкция по эксплуатации

Страница: 7 / 34

7
Rev. 1 20.12.2019
EN

Additional documents that provide safety information
The following documents can provide the operator with additional information to work safely with the
measuring system:

operating manual for electrochemical sensors;

safety data sheets for buffer solutions and other maintenance solutions (ex storage..);

specific notes on product safety.

Use according to destination
This instrument is designed exclusively for electrochemical measurements both in the laboratory and
directly in the field.
Pay attention to the technical specifications shown in the INSTRUMENT FEATURES / TECHNICAL DATA table;
any other use outside them is to be considered unauthorized.
This instrument has been manufactured and tested in compliance with EN 61010-1 safety standards for
electronic instruments and has left the factory in perfect technical conditions (see test report in each
package) and safety.
The regular functionality of the device and the operator’s safety are guaranteed only if all the normal
laboratory safety standards are respected and if all the specific safety measures described in this manual
are observed.

Basic requirements for safe use
The regular functionality of the device and the operator's safety are guaranteed only if all the following
indications are respected:

the instrument can only be used in accordance with the specifications mentioned above;

if using the instrument with the power supply, use only the model supplied. If you need to replace the
power supply, contact your local distributor;

the instrument must operate exclusively in the environmental conditions indicated in this manual;

the only part of the instrument that can be opened by the user is the battery compartment.
Carry out other operations only if explicitly authorized by the manufacturer.

Unauthorized use
The instrument must not be put into operation if:

is visibly damaged (for example due to transportation);

it has been stored for a long period of time in adverse conditions (exposure to direct light, heat sources
or places saturated with gas or vapours) or in environments with conditions different from those
mentioned in this manual.

Device maintenance
If used correctly and in a suitable environment, the instrument does not require maintenance procedure.
It is recommended to occasionally clean the instrument case with a damp cloth and a mild detergent. This
operation must be performed with the instrument off and disconnected from the power supply and only by
expert and authorized personnel.
The housing is in ABS / PC (acrylonitrile butadiene styrene / polycarbonate). This material is sensitive to
some organic solvents, for example toluene, xylene and methyl ethyl ketone (MEK).