vio-pov V.I.O. Stream Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 88

vio-pov V.I.O. Stream Скачать руководство пользователя страница 65

STREAM User Manual

65

  /api/stream/host=172.16.197.198 would create a unicast mpeg-ts over udp
stream.
  /api/stream/host=224.1.1.1 would create a multicast mpeg-ts over udp
stream.
  If the host is a unicast address and the port is set to 8080, an mpeg-ts
unicast stream may be viewed at:udp://@0.0.0.0:8080
  If the multicast host is set to 224.1.1.1 and the port is set to 8554, a
multicast stream may be viewed at: udp://@224.1.1.1.1:8554

IP Multicast Address Ranges and Uses

Range Start Address    Range End Address     Description

224.0.0.0            224.0.0.255        Reserved for special well-known
multicast addresses.
224.0.1.0        238.255.255.255        Globally-scoped (Internet-wide)
multicast addresses.
239.0.0.0        239.255.255.255        Administratively-scoped (local)
multicast addresses.

All multicast addresses begin with 1110 as shown. The well-known group has zeroes for the first
20 bits of the multicast group address, with 8 bits available to define 255 special multicast
addresses. Multicast addresses starting with 1110 1111 are locally-scoped; all other addresses are
globally-scoped (this includes addresses starting with 1110 0000 other than the 255 well-known
addresses.)

stream time to live

/api/stream/ttl=10
This setting is used to identify the number of hops that multicast packets
will live. The range is 1 to 255.

mjpeg

Status

/api/mjpeg

<mjpeg>
  <status>Stopped</status>
  <resolution>1080p</resolution>
  <quality>75</quality>
</mjpeg>

Note that each item may be retrieved individually instead of as a group. For instance
/api/mjpeg/quality will retrieve only the mjpeg quality setting.

«
...
63
64
65
66
67
...
»

Содержание V.I.O. Stream

























































































Отзывы:

Нет отзывов