9
PRODUCT FEATURES
•
Built-under
installation
with
single temperature zone.
•
Continuously variable electronic
temperature control with digital
display and touchpad input.
•
Temperature can be set from 5° to
22°C (40° to 72°F) for either
compartment and can be displayed
in either Fahrenheit or Celsius
degree.
•
Can be set to the long time storage
maturing temperature or a specific
serving
temperature
for
red/white/sparkling wines.
•
Cooling and Heating to maintain
the
perfect
storaging
and/or
service condition.
•
Dynamic compressor type cooling
to ensure interior air circulation
with
even
distribution
of
temperature and humidity.
•
Soft white LED Interior Light
with ON/OFF switch – Function
mode and Showcase mode.
•
Open-door
and
malfunction
warning system.
•
Sabbath mode will allow the
lights to remain off during certain
religious observances.
•
Temperature memory function - If
power is interrupted (power surge,
breaker switch, etc.) and then
powered up again, the Wine
Cellar will operate with the last
temperature set-point.
•
Automatic defrosting with defrost
water evaporation.
•
Reversible tempered double pane
smoked glass door protects your
wine from UV light and creates an
attractive
display
with
few
condensation and low noise.
•
Black coated matte steel outer
frame and black plastic interior
liner offer high performance and
stability. The black liner prevents
excessive light from damaging the
maturity process.
•
Optional stainless steel-framed
glass door with stainless steel
handle.
•
Environmentally
friendly
refrigerant and foaming insulation
gas.
ELECTRICAL CONNECTION
WARNING:
Improper use of the
grounded plug can result in the risk
of electrical shock. If the power cord
is damaged, have it replaced by a
qualified electrician or an authorized
service centre.
All electrical work should be carried
out by a suitably qualified and
competent person in accordance with
local and national safety regulations.
Check that the voltage marked on the
product
corresponds
with
your
supply voltage.
Connect this Wine Cellar to a
separate at least 13A circuit.
Connection should be made via a
suitable switched socket which is
easily accessible. For extra safety it is
advisable to install a residual current
device (RCD) with a trip current of
30mA.
Have the receptacle and the circuit
checked by a qualified electrician to
ensure that the socket is grounded
correctly.
