manualshive.com logo in svg

Vinten Vision 10LF, Руководство по обслуживанию

Поделиться
Скачать
Vinten Vision 10LF Скачать руководство пользователя страница 29

29

Contents

Previous 

Page

First 

Page

Next 

Page

Previous 

View

9.2

Apply Loctite 641 to outer race of bearing and press into mechanism housing assembly, ensuring 

bearing is correctly seated.

Pan mechanism

10

Assemble the pan mechanism as follows (

Fig 6.5

):

10.1 Lightly lubricate components as follows:

10.1.1

All moving surfaces, particularly `O' rings and seals (11, 16, 20 and 23), spherical end 

of pan drag push rod (8), drag actuator (12) and bearing (24) using white bearing grease. This 
grease must not be allowed to come into contact with the drag surfaces.

10.1.2

Thread of pan drag shaft (6) with Rocol M204G grease.

10.1.3

Contact surfaces of drag shoe (15) and bearing housing (10), except for the area 

around clamping screws (19), with grease GP50. This grease must not be allowed to come into 
contact with the drag surfaces. 

10.2 The correct orientation of the Omniseal (20), as shown in 

Fig 6.5

 is important. Renew the seal.

10.3 Fit new `O' rings and seals throughout.

10.4 Prior to assembly fill the base (17) with 12.75 cc of Vinten Fluid No. 3 (

Section 3

).

10.5 Install bearing (24) in mechanism housing (9) and secure with Loctite 641.

10.6 Install `O' ring (23) in pan bearing housing (10). Secure pan bearing housing to mechanism 
housing (9) with two screws (22) and Loctite 222E, ensuring pan bearing housing is centralized on 
mechanism housing.

10.7 Install Omniseal (20) in pan drag top plate (14), observing correct orientation.

10.8 Install the thrust race and two thrust washers (13) in pan drag top plate (14), observing correct 
orientation.

10.9 Position pan drag top plate and assemble components over the pan bearing housing (10).

10.10 Install `O' ring (11) on drag actuator (12). Position actuator in drag shoe assembly (15) and install 
both on the pan bearing housing (10). Secure temporarily with two screws (19)

10.11 Install pan drag lever (29) on drag actuator and secure temporarily with screw (28). 

10.12 Install washers (7) and pan drag push road (8) in pan drag shaft (6), Screw pan drag shaft 
(complete with pan drag knob boss (5)) into mechanism housing (9).

10.13 Install assembly in pan centralizing fixture (

3390-904TL

).

10.14 Screw in pan drag shaft (6) to expand drag shoe assembly.

NOTE:

The design of the pan drag top plate and spherical base changed from Serial No. 1197. 
Ensure correct top plate, spherical base and ‘O’ ring are replaced.

Содержание Vision 10LF






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды