Vinten Vision 10LF, Руководство по обслуживанию

Страница: 20 / 53

20
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 4
Servicing
Contents Para
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjustments
Drag control knob adjustment
Normal conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation in low ambient temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Brake knob adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General
1 The Vision 10LF head requires a minimum of periodic servicing. Its rotational and drag mechanisms are
totally enclosed to prevent the ingress of dirt or foreign bodies. If the head becomes faulty reference should be
made to Section 5 of this manual, or the unit may be returned to Vinten Broadcast Limited or your local
distributor for overhaul.
Cleaning
2 During indoor use, the only cleaning required should be a regular wipe over with a lint-free cloth. Dirt
accumulated during storage may be removed using a semi-stiff brush. Particular attention should be paid to
the levelling ball and mounting face of the head and to the space between the tilting assembly and the base.
3 The Vision 10LF head is weatherproof. However, use out-of-doors under adverse conditions will require
special attention. Salt spray should be washed off with fresh water at the earliest opportunity. Sand and dirt
acts as an abrasive and should be removed using a semi-stiff brush or vacuum cleaner.
Lubrication
4 The bearings in the pan and tilt head are packed with grease. Under normal operating conditions they
will only require re-greasing if there is any harshness or stiffness in movement. Refer to Section 5 to dismantle
the head for re-greasing.
NOTE: Use only detergent-based cleaners. DO NOT use solvent- or oil-based cleaners, abrasives
or wire brushes to remove accumulations of dirt, as these damage the protective surfaces.