Back
19
Install the battery
(18.1)
in the battery compartment, ensuring that the wiring is neatly
stowed.
Refit the battery cover
(18)
.
Press the illumination button
(10)
and ensure that the level bubble
(9)
is lit for approximately
15 seconds.
Adjustments
To enable the payload to be correctly balanced, the wedge adaptor may require repositioning.
The following adjustments may be necessary after prolonged use:
The platform slide clamp may require adjustment.
The pan and tilt brakes may require adjustment.
The pan and tilt drag controls may require adjustment.
Repositioning the wedge adaptor
The wedge adaptor
(14)
is secured by four cap head screws
(15)
which pass through the wedge
adaptor into the sliding plate
(13)
. The wedge adaptor may be fitted in three positions.
Fig 4 Level Bubble Battery Replacement
WARNING! Overlong screws will prevent the sliding plate from operating.
Always use the screws provided (M6 x 30 mm).
(18.2)
(10)
(18)
(18.1)
(9)