11
Section 1
Introduction and Description
Contents
Para
Introduction
1
The protouch Pro-10 system from Vinten comprises a Pro-10 pan and tilt head, a Pozi-Loc two-stage
tripod, an adjustable floor spreader and a soft case.
Description
Pro-10 pan and tilt head
2
The Pro-10 pan and tilt head
is designed to support the latest professional digital video
cameras, up to 10 kg (22 lb) in weight. It embodies fluid drag assemblies for pan and tilt motions with brakes
on each axis to lock the head in any position. An illuminated levelling bubble is fitted to the rear of the head
and a quick-release, adjustable slide plate is provided for camera mounting. A single fixed pan bar is supplied.
Balance
3
The balance spring in the Pro-10 pan and tilt head is set for an optimum payload of 7.5 kg (16.5 lb) at a
centre of gravity (C of G) height of 12.5 cm (4.9 in.), but the head will support a payload of up to 10 kg (22 lb).
Pan and tilt drag
4
Both the pan and tilt mechanisms incorporate fluid drag assemblies to ensure smooth movement of the
camera about these axes and are fitted with control knobs
to adjust the drag setting.
Pan and tilt brakes
5
Brakes
on each axis are provided to lock the head in any position.
Illuminated levelling bubble
6
To enable the head to be levelled, an illuminated levelling bubble
is fitted to the rear of the head.
When the switch
is pressed, the bubble will be illuminated for approximately 15 seconds. The battery for
the illuminated bubble is contained in a battery compartment
Содержание pro-touch Pro-10 System
Страница 1: ...Contents Vinten Camera Control Solutions Next Page Previous View pro touch ...
Страница 38: ...38 Contents Previous Page First Page Next Page Previous View Fig 6 1 Pro 10 System 1 2 3 ...
Страница 47: ...47 Contents Previous Page First Page Next Page Previous View Fig 6 5 Pozi Loc Two Stage Tripod 3819 3 1 2 3 4 ...