13
Camera mounting
7
The camera is attached to the head by means of a slide plate
, which is provided with a spring-
loaded locating pin
and 1/4 in.
and 3/8 in.
screws. When not in use the screws are stowed in the
is provided to hold the slide plate in position and a lock
prevents
its inadvertent removal from the head.
Pan bar
8
Pan bar mounting points
are located at the rear of the head, on either side of the camera mounting
platform. The pan bar is attached using a pan bar clamp, with angular adjustment available on the mount
serrations. A single fixed pan bar
is supplied. A second pan bar may be fitted.
Pozi-Loc tripod
9
The Pozi-Loc two-stage tripod
has aluminium legs and a 75 mm levelling bowl
. It is fitted
with the highly-efficient Pozi-Loc leg clamps
, which provide quick set-up and easy adjustment.
10
An optional ‘Spread-Loc’ mid-level spreader may be fitted to mounting points
on the legs.
Floor spreader
11
increases rigidity of the tripod. Being flexible, the spreader compensates for
uneven ground, protects floors and carpets and prevents the tripod legs sinking into soft ground. It should be
used at all times.
12
Each arm is of the spreader is adjustable for length
and the tripod feet are secured by rubber
straps
.
Содержание pro-touch Pro-10 System
Страница 1: ...Contents Vinten Camera Control Solutions Next Page Previous View pro touch ...
Страница 38: ...38 Contents Previous Page First Page Next Page Previous View Fig 6 1 Pro 10 System 1 2 3 ...
Страница 47: ...47 Contents Previous Page First Page Next Page Previous View Fig 6 5 Pozi Loc Two Stage Tripod 3819 3 1 2 3 4 ...