Vinten OSPREY stuido S Скачать руководство пользователя страница 6

Страница: 6 / 32

Safety

Introduction and Description

The Osprey Studio is a fully functioning studio pedestal for large

payloads up to 80kg / 177lb. It is a full studio version of the Osprey

elite and is capable of supporting large Vinten Vector heads and

the latest range of portable or full facility digital cameras and

teleprompters.

It can track talent eyelines from a seated to standing position ‘on shot’

with its extended fully balanced range. It has an inlet valve for any air

source, making Perfect Balance easy to achieve. There is a storage

area for the camera operator. In addition, the Osprey Studio pedestal

includes a pressure gauge for clear and reliable set-up. It has a

single brake and selector for both single wheel and ‘all wheel’ crab

WARNING!

Do NOT attempt to use this product if you do not

understand how to operate it.
Do NOT use this product for any other purpose than

that specified in the Usage statement above.

Maintenance beyond that detailed in this Operators

Guide must be performed only by competent personnel

in accordance with the procedures.

About this Guide

This operators guide is issued for the Osprey Studio S Pedestal, Part

No. V4173-0001.

The guide provides instructions for operation and routine maintenance.

•  Safety / educational videos
•  Exploded diagrams leading to the Parts Store
•  Recycling information and life cycle upgrades
•  Warranty information & links to registration /

submit case to service team/case management

•  User manuals
•  Easy access to service centre
•  This QR code is also on the Pedestal for easy

reference.

Scan this QR code to access a dedicated page

containing important information:

steering for working in tight spaces and on shot direction changes. It

comes with an integral cable guard for studio use.

Key features

Full, 2-stage balance range for total ‘on shot’ elevation, perfect for

moving from seated to standing talent in game shows, entertainment

shows, drama and performances

Full crab and steer facilities controlled from a central interchangeable

steering ring for enhanced manoeuvrability and on-shot steering

Durable skirted base for ultimate stability

Integral cable guard to prevent cable damage and disturbances to

shots

Single action parking brake

Pedestal supplied with Quickfix quick release system & operator

storage area

Usage

The Osprey Studio S pedestal is designed for use in television studios

to support and balance a pan and tilt head, camera and ancillary

equipment weighing up to 80 kg / 176 lb. This product is intended for

use on an unobstructed and reasonably level surface by television

camera operators.

Содержание OSPREY stuido S

































Результаты поиска

Содержание OSPREY stuido S

Отзывы:

Бренды по названию

Популярные бренды

Vinten OSPREY stuido S, Руководство пользователя

Результаты поиска

Содержание OSPREY stuido S

Отзывы:

Бренды по названию

Популярные бренды