manualshive.com logo in svg

Vinten OSPREY stuido S, Руководство пользователя

Поделиться
Скачать
Vinten OSPREY stuido S Скачать руководство пользователя страница 22

20

Operation

Transportation and storage

1. 

Apply the brakes (7).

2. 

Set the safety catch slide (14) to LOCK position (I) and fully 

depress both columns (15) until the safety catch engages.

4. 

Remove the camera and accessories.

5. 

Using the Schrader valve cap (1), reduce pedestal pressure to 3.5 

bar (50 psi).

!

WARNING! 

Local, national or international regulations 

may apply to the transport and storage of pressurized 

pedestals, specifically, not to be classed as dangerous 

goods under IATA regulation UN 1956 - Compressed 

Gas Shipping. Pressure must be reduced to 2bar 

(28psi) or less. See Service Bulletin V4002- 4990 for 

further information and instruction.

!

WARNING: 

Ensure the pedestal pressure is increased 

to a minimum of 3.5 bar (50 psi) before attempting 

to raise the column. This ensures that the elevating 

mechanism remains in tension

WARNING!

 Do not reduce pedestal pressure below 3.5 

bar (50 psi). 

To facilitate removal of the camera and mounting, 

pressure should be reduced to 3.5 bar (50 psi).

Содержание OSPREY stuido S

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды