Vinten OSPREY stuido S, Руководство пользователя

Страница: 15 / 32

13
Installation
Pressurizing the pedestal using a portable
pump
!
WARNING! Do not pressurize the pedestal beyond the
maximum safe working pressure indicated by the leading
edge of the red sector on the gauge. The pedestal is
fitted with a pressure relief valve as a safeguard against
over-pressurization. Do not attempt to adjust the
pressure relief valve.
!
WARNING! A pressurized pedestal will rise rapidly when
safety catch is released. Do not release safety catch
when pedestal is pressurized and balancing load is not
installed. Always restrain the pedestal by hand pressure
on the steering ring when the safety catch is released.
To pressurize the pedestal using the Vinten portable *pump,
proceed as follows:
Attach the intended payload, ensuring that all items such as pan
bars, prompters, lenses etc., are fitted.
1.
Set the safety catch slide (14) to to LOCK position (I) and using
the ring (15) fully depress the moving column until the safety catch
engages.
2.
Unclip the hose from the pump. Turn the steering ring until the
pressure gauge is visible through the window.
3.
Screw the valve adaptor to the pedestal charging valve (1).Ensure
the pump nozzle is fitted securely onto the adaptor and is firmly
locked in position.
4.
Stand over the pump with both feet on the base treads.
5.
Gripping the handle with both hands, and using full steady strokes,
pressurize the pedestal to the required pressure. Do not exceed the
maximum working pressure, indicated by the leading edge of the
red sector on the gauge (18).
6.
Disconnect the pump hose and valve adaptor from the pedestal
charging valve.
*Pump model
may differ.