Vinteck
V-8 – true-bypass MIDI switching pedalboard
pag.9
Edition 01eng rev. 0
OUTPUT CHANNEL
Press buttons 2 and 6 together, keep pressed 3 secs.
Display blinks between OT (as OUT) and a number from 1 to 16.
1 to 16 is channel selection of output
Choose with buttons UP and L/P (as DOWN) , then confirm and exit with button 8.
Reference number 0-127 or 1/128
Press buttons 3 and 7 together, keep pressed 3 secs.
Display blinks between CH, and a number from 0 to 1
Choose with button UP and L/P (as down).
Effettuare la selezione con pulsanti UP e L/P (down).
Confirm and exit with button 8.
EXTERNAL BUTTONS FOR CONTROL CHANGE (MIDI TAP TEMPO)
With an external temporary Normally Open buttons it is possible to manage and send a Control
Change command via MIDI.
To set the CONTROL CHANGE value:
Press buttons 4 and 8 together, keep pressed 3 secs
Display blinks between CC, and a number from 0 to 99 then 0.0. to 2.8 for values from 100 to 128.
Choose value with buttons UP and L/P (as down) .
Preset values is CC #80 . On some devices this the preset as well. Check on users manual the right CC
values.
Confirm and exit with button 8.
PROGRAM CHANGE MIDI MAPPING
.
V-8 allows to assign a PROGRAM CHANGE number difference from program number.
Factory preset got same number.
To change number:
Posizione V-8 con program ( 1 to 99)
NOTE: It’s important to remeber the number of program you’re working.
With white led “P” ON press L/P and keep pressed for 3 secs.
Display show a blinking number, which is the number of Program Change.
Use UP and L/P (as down) to define the new program change number.
Confirm and exit with button 8
FACTORY RESET
On V-8 it’s possible to return to beginning default settings.
To make Factory reset:
Shot down power supply, removing power supply cord
Press buttons 1 and 5 together, keep pressed and reinser power supply.
Display show “ii” , as Inizialization
Release buttons.
Note: Factory reset is not reversibile.
