Vinteck
V-8 – true-bypass MIDI switching pedalboard
pag.6
Edition 01eng rev. 0
Leds show:;
- 1-8 BLUE loops 1 to 8
- S 1-4 YELLOW switch on/off 1, 2, 3 end 4 .
- P
WHITE. Show PROGRAM MODE ON (programs will be recalled)
- L – BLU. Show LOOP MODE ON (loops will be recalled)
WARNING
:
The light of the LEDS is very intense to allow visibility even under intense stage lights.
To avoid the risk of glare do not look directly into the light.
Vinteck declines all responsibility for damages to persons, animals and things caused
by the non-observance of such a provision
Button 1 - 8 may activate single loops or recalls programs, plus several MIDI
Button P/L make selection between LOOP e PROGRAMS, plus several MIDI functions
Button UP allows ratation of banks and selection of number od actve banks, plus MIDI functions,
WIRING AND CONNECTIONS EXAMPLES
V-8 must be powered with original power supply only.
Insert the power supply cord in his plug. When powered the V-UNO is active.
WORNING : never cut the wire of 230/12VAC power supply.
Never open the V-8 power supply. 230VAC inside when connected to 230 V socket.
Vinteck sas do not have any responsibility in case of damage to people, animals or objects in case of
non respect of this point. No warranty will be applied if power supply unit is disassembled or modified.
V-8 allows several way to connect to systems. You can see some example.
Note
: examples are just examples, are not law. There are several possibilities to make good connections, just
found the best for you sound!
Example 1.
8 stomps chain and out to amp.
