Sabbath Mode exception:
The High/Low Temperature alert will
displayed in case of a high or low
temperature inside the appliance. The
alert icon will turn On, but will not blink and
it will remain until the Sabbath mode is
deactivated. An audio alarm will sound and
automatically turn Off after 10 minutes.
When Sabbath mode is deactivation,
temperature displays will show the current
temperatures.
Changing between°C/°F
Single combined press & release on
increase bottom temperature set & Light
button to change the temperature type
(°C/°F).
When °C is set, Bottom & Upper
temperature display shows and blinks
“°C”for 5 seconds before returning to set
temperature & “°C” for 5 seconds.
Any alert turns off temporarily.
When F° is set, Bottom & Upper
temperature display shows and blinks “F°”
& “F°” for 5 seconds.
Any alert turns off temporarily.
Reset Filter alert
Press & Hold combined on Mode &
decrease bottons for 5 seconds to reset the
filter change counter.
If the alert is on, it turns off.
Single/Muliti/Cellaring zone set
Single press Mode to change the Single
zone, Multi zone, and Cellaring mode.
If the mode set is Single, the Single zone
feedback will light-up, and blink and both
temperatures change to 18°C. After 5
seconds without any interaction wih the
Mode button, the Single zone feedback
stops blinking and keeps steady, and both
temperatures show the current temperature.
In Single zone mode, both temperature
controls will work in sync.
If the mode set is Multi, the Multi zone
feedback will light-up, and blink and the
upper temperature changes to 18°C and
8°C on the bottom. After 5 seconds without
any interaction with the Mode button, the
Multi zone feedback stops blinking and
keeps steady and both temperatures show
the current temperature.
In Multi zone mode, each temperature
control will work separately.
15
User Manual
