Vintec VWCM280CAB-L, Руководство пользователя

Страница: 7 / 24

On receipt, check to ensure that the appli-
ance has not been damaged during trans-
port. Transport damage should be reported
to the local distributor before the wine
cooler is put to use. Do not remove glass
door tapes until the unit is positioned at its
final location (see label at the glass door).
Remove the packaging. Clean the inside of
the cabinet using warm water with a mild
detergent. Rinse with clean water and dry
thoroughly (see cleaning instructions). Use
a soft cloth.
If during transport the appliance has been
laid down, or if it has been stored in cold
surroundings (colder than + 5°C), it must be
allowed to stabilise in an upright position for
at least 24 hour before being switched on.
Before use
● the lower the ambient temperature.
● the warmer thermostat set point.
● the lower the number and the shorter the
length of the door openings.
The energy consumption is reduced when:
Note: for household use only
This appliance is intended to be used in
household and similar applications such as
● staff kitchen areas in shops, offices and
other working environments;
● farm houses and by clients in hotels,
motels and other residential type environ-
ments;
● bed and breakfast type environments;
● catering and similar non-retail applica-
tions.
Important Information that may
impact your Manufacturer’s
Warranty
Adherence to the directions for use in this
manual is extremely important for health
and safety. Failure to strictly adhere to the
requirements in this manual may result in
personal injury, property damage and af-
fect your ability to make a claim under the
Vintec manufacturer’s warranty provided
with your product. Products must be used,
installed and operated in accordance with
this manual. You may not be able to claim
on the Vintec manufacturer’s warranty in the
event that your product fault is due to failure
to adhere to this manual.
7
User Manual