Vintec VWCM280CAB-L, Руководство пользователя

Страница: 14 / 24

2. put back the shelf to the holders and check the shelf level and plane with care. If you en-
sured the shelf is in good position than replace back the two shelf backside fixation clips and
push it down (you will hear when it snaped in)
To remove the telescoping shelves:
1. Open door to fully 135°.
2. Remove all wine bottles from the shelf.
3. Fully extend the shelf.
4. Using a TX20 head screwdriver, remove the 2 rail-shelf screws (1 per rail).
5. Pull forward the shelf and lift up it.
6. Use a thin flat screwdriver to snap out the locker clipse and push up the rail in the mean -
time. Front and back of the rail on both side of cabinet.
To replace the telescoping shelves:
Replace is a back way process:
1. Reposition the rail.
2. Align in the clips to the side wall square holes
and push it down.
In order to easy repositioning use the positioning
holes on the side wall.
Take care to reposition the same level the two end
and the both side.
fig. 14
fig. 15
fig. 13
14
User Manual