Vintec VWCM280CAB-L, Руководство пользователя

Страница: 17 / 24

High/Low Temperature alert. This alert will
display in case of a high or low temperature
inside the appliance. The alert icon will turn
on, but will not blink and will remain on till
Sabbath mode is deactivated. An audio
alarm will sound for 10 minutes and will
then shut off automatically.
Sabbath mode deactivation
S
M
WIP
2.2 Child L ock
Single combined pr ess on incr ease and
decr ease upper temper ature set to
activ ate/deactiv ate child lock.
Child lock feedback. It lit-up when Child lock is
activ ated .
Relat ed to 3. 4
2.4 C°/F° set
Single combined pr ess on decr ease bott om
temper ature set & Light button to change the
temper ature type ( C°/F°) .
2.3 Sabbath mode
S
M
Press&Hold combined on incr ease bott om
temper ature set & Light buttons for 5 seconds
to activ ate/deactiv ate Sabbath mode .
When activ ated, Bott om & Upper temper ature
displays sho w and blinks “Sb ” & “On” for 5
seconds until the it be deactiv ated . In this state:
- Any button command is disabled apart from
the incr ease bott om temper ature set & Light
combination command to deactiv ate the
Sabbath mode .
- All lights ar e turned Off - apart from “Sb ” &
“On”- , all sounds ar e mut ed .
- Opening or closing the door will not directly
turning on or off any lights, digital r eadouts,
solenoids, fans, valv es, compr essor , icons, tones,
or alarms.
- All alerts will not be display ed until the
Sabbath Mode is deactiv ated, ex cept by the
High/L ow Temper ature alerts.
S
M
When C° is set , Bott om & Upper temper ature
display sho ws and blinks “C°” & “C°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When F° is set , Bott om & Upper temper atur e
display sho ws and blinks “F°” & “F°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When deactiv ated, Bott om & Upper temper a-
ture displays sho w and blinks “Sb ” & “OF” for 5
seconds.
Exception:
The High/L ow Temper ature alerts will be
display ed in case of high or low temper atur e
inside the appliance . The alert icon turns On, but
will not blink, and it will remain until the Sabbath
Mode is deactiv ated. An audio alarm will
sounds and aut omatically turn off after 10
minutes .
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
Repeat the steps used for activation.
Upper and Lower temperature displays will
blink "Sb" & "Of" for 5 seconds and then the
displays revert to normal.
°C/°F set
Single combined press on increase bottom
temperature set & Light button to change
the temperature type (°C/F°).
S
M
WIP
2.2 Child L ock
Single combined pr ess on incr ease and
decr ease upper temper ature set to
activ ate/deactiv ate child lock.
Child lock feedback. It lit-up when Child lock is
activ ated .
Relat ed to 3. 4
2.4 C°/F° set
Single combined pr ess on decr ease bott om
temper ature set & Light button to change the
temper ature type ( C°/F°) .
2.3 Sabbath mode
S
M
Press&Hold combined on incr ease bott om
temper ature set & Light buttons for 5 seconds
to activ ate/deactiv ate Sabbath mode .
When activ ated, Bott om & Upper temper ature
displays sho w and blinks “Sb ” & “On” for 5
seconds until the it be deactiv ated . In this state:
- Any button command is disabled apart from
the incr ease bott om temper ature set & Light
combination command to deactiv ate the
Sabbath mode .
- All lights ar e turned Off - apart from “Sb ” &
“On”- , all sounds ar e mut ed .
- Opening or closing the door will not directly
turning on or off any lights, digital r eadouts,
solenoids, fans, valv es, compr essor , icons, tones,
or alarms.
- All alerts will not be display ed until the
Sabbath Mode is deactiv ated, ex cept by the
High/L ow Temper ature alerts.
S
M
When C° is set , Bott om & Upper temper ature
display sho ws and blinks “C°” & “C°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When F° is set , Bott om & Upper temper atur e
display sho ws and blinks “F°” & “F°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When deactiv ated, Bott om & Upper temper a-
ture displays sho w and blinks “Sb ” & “OF” for 5
seconds.
Exception:
The High/L ow Temper ature alerts will be
display ed in case of high or low temper atur e
inside the appliance . The alert icon turns On, but
will not blink, and it will remain until the Sabbath
Mode is deactiv ated. An audio alarm will
sounds and aut omatically turn off after 10
minutes .
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
When °C is set, Bottom & Upper tempera-
ture display shows and blinks °C & °C for 5
seconds.
Any alert turns off temporarily.
S
M
WIP
2.2 Child L ock
Single combined pr ess on incr ease and
decr ease upper temper ature set to
activ ate/deactiv ate child lock.
Child lock feedback. It lit-up when Child lock is
activ ated .
Relat ed to 3. 4
2.4 C°/F° set
Single combined pr ess on decr ease bott om
temper ature set & Light button to change the
temper ature type ( C°/F°) .
2.3 Sabbath mode
S
M
Press&Hold combined on incr ease bott om
temper ature set & Light buttons for 5 seconds
to activ ate/deactiv ate Sabbath mode .
When activ ated, Bott om & Upper temper ature
displays sho w and blinks “Sb ” & “On” for 5
seconds until the it be deactiv ated . In this state:
- Any button command is disabled apart from
the incr ease bott om temper ature set & Light
combination command to deactiv ate the
Sabbath mode .
- All lights ar e turned Off - apart from “Sb ” &
“On”- , all sounds ar e mut ed .
- Opening or closing the door will not directly
turning on or off any lights, digital r eadouts,
solenoids, fans, valv es, compr essor , icons, tones,
or alarms.
- All alerts will not be display ed until the
Sabbath Mode is deactiv ated, ex cept by the
High/L ow Temper ature alerts.
S
M
When C° is set , Bott om & Upper temper ature
display sho ws and blinks “C°” & “C°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When F° is set , Bott om & Upper temper atur e
display sho ws and blinks “F°” & “F°” for 5
seconds.
Any alert turns off tempor arily.
S
M
When deactiv ated, Bott om & Upper temper a-
ture displays sho w and blinks “Sb ” & “OF” for 5
seconds.
Exception:
The High/L ow Temper ature alerts will be
display ed in case of high or low temper atur e
inside the appliance . The alert icon turns On, but
will not blink, and it will remain until the Sabbath
Mode is deactiv ated. An audio alarm will
sounds and aut omatically turn off after 10
minutes .
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
When F° is set, Bottom & Upper tempera-
ture display shows and blinks “F°” & “F°” for
5 seconds.
Any alert turns off temporarily.
Reset Filter alert
Press & Hold combined on Mode & de -
crease bottons for 5 seconds to reset the
filter change counter.
2.5 Re set Filter alert
Press&Hold combined on On/ Off & decr ease
bottoms for 5 seconds t o re set the filter change
count er.
If the alert is on, it turns o ff.
If the mode set is Single, the Single zone feed -
back will lit-up.
In Single zone mode, both temper atur e contr ols
will work in sync.
Relat ed to 3. 5
S
M
If the mode set is Multi, the Multi zone feedback
will lit-up.
In Multi zone mode, each temper atur e contr ol
will work separ at ely.
Relat ed to 3. 6
If the mode set is Cellaring , the Single and Multi
zone feedback will be Off, and Bott om & Upper
temper atur e display sho ws “CE” & “CE” until the
Cellaring mode is deactiv at ed .
In Cellaring mode, the temper atur e is fix ed and
can not be changed - ar ound 12° to 16° (TBC) .
S
M
WIP
2.6 Rest to f actory settings
Press&Hold combined on On/ Off & increase
upper buttons for 5 seconds to re set the ma-
chine settings to the fact ory setting.
2.7 Single /Multi /C ellaring z one set
Single combined pr ess on incr ease & decr ease
bottom temper atur e set to change the Single
zone, Multi zone , and Cellaring mode .
S
M
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
S
M
If the alert is on, it turns off.
Single/Muliti/Cellaring zone set
Single press Mode to change the Single
zone, Multi zone, and Cellaring mode.
2.5 Re set Filter alert
Press&Hold combined on On/ Off & decr ease
bottoms for 5 seconds t o re set the filter change
count er.
If the alert is on, it turns o ff.
If the mode set is Single, the Single zone feed -
back will lit-up.
In Single zone mode, both temper atur e contr ols
will work in sync.
Relat ed to 3. 5
S
M
If the mode set is Multi, the Multi zone feedback
will lit-up.
In Multi zone mode, each temper atur e contr ol
will work separ at ely.
Relat ed to 3. 6
If the mode set is Cellaring , the Single and Multi
zone feedback will be Off, and Bott om & Upper
temper atur e display sho ws “CE” & “CE” until the
Cellaring mode is deactiv at ed .
In Cellaring mode, the temper atur e is fix ed and
can not be changed - ar ound 12° to 16° (TBC) .
S
M
WIP
2.6 Rest to f actory settings
Press&Hold combined on On/ Off & increase
upper buttons for 5 seconds to re set the ma-
chine settings to the fact ory setting.
2.7 Single /Multi /C ellaring z one set
Single combined pr ess on incr ease & decr ease
bottom temper atur e set to change the Single
zone, Multi zone , and Cellaring mode .
S
M
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
S
M
If the mode set is Single, the Single zone
feedback will light-up, and blink and both
temperatures change to 18°C. After 5
seconds without any interaction wih the
Mode button, the Single zone feedback
stops blinking and keeps steady, and both
temperatures show the current temperature.
In Single zone mode, both temperature
controls will work in sync.
2.5 Re set Filter alert
Press&Hold combined on On/ Off & decr ease
bottoms for 5 seconds t o re set the filter change
count er.
If the alert is on, it turns o ff.
If the mode set is Single, the Single zone feed -
back will lit-up.
In Single zone mode, both temper atur e contr ols
will work in sync.
Relat ed to 3. 5
S
M
If the mode set is Multi, the Multi zone feedback
will lit-up.
In Multi zone mode, each temper atur e contr ol
will work separ at ely.
Relat ed to 3. 6
If the mode set is Cellaring , the Single and Multi
zone feedback will be Off, and Bott om & Upper
temper atur e display sho ws “CE” & “CE” until the
Cellaring mode is deactiv at ed .
In Cellaring mode, the temper atur e is fix ed and
can not be changed - ar ound 12° to 16° (TBC) .
S
M
WIP
2.6 Rest to f actory settings
Press&Hold combined on On/ Off & increase
upper buttons for 5 seconds to re set the ma-
chine settings to the fact ory setting.
2.7 Single /Multi /C ellaring z one set
Single combined pr ess on incr ease & decr ease
bottom temper atur e set to change the Single
zone, Multi zone , and Cellaring mode .
S
M
2018.10.0 2
Vintec - Ve stfros t UI Pr oposal
S
M
If the mode set is Multi, the Multi zone
feedback will light-up, and blink and the up-
per temperature changes to 18°C and 8°C
on the bottom. After 5 seconds without any
interaction with the Mode button, the Multi
zone feedback stops blinking and keeps
steady and both temperatures show the
current temperature.
In Multi zone mode, each temperature con-
trol will work separately.
17
User Manual