Instructions
bracket at the top, middle, and bottom of each Wine
Wall rack height (Figure F). These will serve as “guide
rods’ to line up the next Post.
7x: Line up next Post:
Measure 39 1/2” to
the next Post location* — centerline to centerline —
and use “guide rods” to properly align.
*Adjust the
measurement width for any custom-cut wine rods.
8x: Fasten “guide rods”:
Following Wine
Wall instructions, attach the other end of the “guide
rods” to the second post. Ensure Post and Rods are
plumb before fastening tightly and securing base
plates into floor and ceiling. Then install all remaining
rods.
9x: Repeat:
Continue steps 5x-8x for as many
Wine Wall Extensions needed.
10x Add wine:
Only the good stuff.
For additional support, visit www.vintageview.com
Figure E