Vintage Air 564191, Инструкция по эксплуатации

Страница: 8 / 34

8
www.vintageair.com
905644 REV A 01/10/19, PG 8 OF 33
Passenger Compartment
Disassembly
1.
2.
3.
4.
5.
6.
7.
8.
Remove the glove box door (retain) (See Figure 4, below).
Remove the glove box (discard, but retain screws) (See Figure 1, below).
Remove the radio (retain) (See Figure 1, below).
Remove the A/C & heater assembly and all related ducting (discard, but retain screws) (See Figures 1 & 2,
below).
Remove the OEM control panel assembly (See Figure 2, below).
NOTE: Refer to the control panel
instructions for installation of controls.
Remove the driver and passenger side louvers (retain) (See Figures 3 & 4, below). NOTE: The instrument
panel must be removed for access to the driver side outlet.
Remove the passenger side kick panel fresh air cover (discard) and kick panel (retain) (See Figure 2, below).
Disconnect and remove the fresh air pull cable from the kick panel (discard) (See Figure 2, below).
Perform the Following:
NOTE: Removal of the dashboard is required to install the evaporator. Vintage Air recommends using
the factory manual when disassembling and reassembling the dashboard.
Figure 1
Figure 3
Figure 4
Figure 2
Behind Dash
A/C & Heater Assembly
and Related Ducting
Dash
Radio
OEM Control
Panel Assembly
Glove Box
Kick Panel
Fresh Air Cover
Fresh Air
Pull Cable
Passenger Side
Kick Panel
Driver Side
Louver
Dash Pad
Instrument
Panel
Passenger Side
Louver
Glove Box
Door