7
www.vintageair.com
901345 REV A 05/12/17, PG 7 OF 12
Mounting Bracket Installation
1.
Install the condenser mounting brackets onto the condenser using (4) 10-24 x 3/8” pan head screws and (4)
10-24 nuts with star washers as shown in Photos 4, 5, 6 and 7, below.
Figure ##
O-ring Installs
Over Male Insert
to Swaged Lip
O-ring
#6 O-ring
#8 O-ring
#10 O-ring
O-ring
Supplied Oil
for O-rings
Male
Insert
Female Nut
Hold With
This Wrench
Twist With
This Wrench
Lubricating O-rings
For a proper seal of fittings: Install supplied
O-rings as shown, and lubricate with supplied
oil.
NOTE: Standard torque specifications:
#6: 11 to 13 ft-lb.
#8: 15 to 20 ft-lb.
#10: 21 to 27 ft-lb.
Figure 1
Driver Side
Condenser Bracket
Assembly
643111
Passenger Side
Condenser Bracket
Assembly
643113
(4) 10-24 x 3/8”
Pan Head Screws
Front View
Front View
Engine Side
View
Engine Side
View
(4) 10-24 Nuts
with Star Washers
Photo 4
Photo 5
Photo 6
Photo 7
