23
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and
disconnect the power cable(s) from the electrical outlet(s).
Contact an
authorized Service Representative to correct the problem:
The equipment emits unusual odors or makes unusual noises.
The power cable is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the machine.
The machine is exposed to water.
Any part of the machine is damaged
Maintenance Information
1. Any operator product maintenance procedures will be described in the user
documentation supplied with the product.
2. Do not carry out any maintenance on this product which is not described in the
customer documentation
3. Use supplies and cleaning materials only as directed in the Operator section of
this manual.
4. Do not remove covers or guards that are fastened with screws. There are no
parts behind these covers that you can maintain or service.
Do not use aerosol cleaners. Aerosol cleaners can be explosive or
flammable when used on electromechanical equipment.
Regulatory Information
Certifications in Europe:
CE Mark (European Union)
The CE mark applied to this equipment symbolizes the manufacture’s declaration of
conformity with the following applicable Directives of the European Union as of the dates
indicated:
2006/95/EC
December 12, 2006 Council Directive 2006/95/EC as amended. Approximation of the
laws of the member states related to low voltage equipment.
2004/108/EC
December 15, 2004 Council Directive 2004/108/EC as amended. Approximation of the
laws of the member states related to electromagnetic compatibility.
A full declaration of conformity, defining the relevant directives and referenced standards,
can be obtained from a Authorized local dealer.
In order to allow this equipment to operate in proximity to Industrial Scientific
and Medical (ISM) equipment, the external radiation from the ISM equipment
may have to be limited or special mitigation measures taken.
