manualshive.com logo in svg
background image

 

22 

Electrical Safety Information 

1.  The  power  receptacle  for  the  machine  must  meet  the  requirements  stated  on  the 

data plate on the rear of the machine. If there is uncertainty that the electrical supply 
meets the requirements, please consult the local power company or an electrician for 
advice. 

2.  The  socket  outlet  shall  be  installed  near  the  equipment  and  shall  be  easily 

accessible. 

3.  Use  the  power  cable  that  is  supplied  with  the  machine.  Do  not  use  an  extension 

cord, remove, or modify the power cord plug. 

4.  Plug the power cable directly into a correctly grounded electrical outlet. If there is any 

doubt regarding the correct grounding of the desired outlet, consult an electrician. 

5.  Do not use an adapter to connect any equipment to an electrical outlet that lacks a 

ground connection terminal. 

6.  Do not place this equipment where people might step or trip on the power cable. 

7.  Do not place objects on the power cable. 

8.  Do not push objects into the slots or openings of the machine. Electrical shock or fire 

may result. 

9.  Do  not  obstruct  ventilation  openings.  These  openings  are  used  to  provide  proper 

cooling to the machine. 

Electrical Supply 

1. 

This  product  shall  be  operated  from  the  type  of  electrical  supply  indicted  on  the 
product’s data plate label. If there is uncertainty that the electrical supply meets the 
requirements, please consult a licensed electrician for advice. 

2. 

Always connect equipment to a correctly grounded power outlet. If in doubt, have the 
outlet checked by a qualified electrician. 

This equipment must be connected to a protective earth circuit. This 
equipment is supplied with a plug that has a protective earth pin. This 
plug  will  only  fit  into  an  earthed  electrical  outlet.  This  is  a  safety 
feature.  If you are unable to insert the plug into the outlet, contact a 
licensed electrician to replace the outlet. 

Disconnect Device  

The  power  cable  is  the  disconnect  device  for  this  equipment.  It  is  attached  to  the 
back  of  the  machine  as  a  plug-in  device.  To  remove  all  electrical  power  from  the 
equipment, disconnect the power cable from the electrical outlet.  

Содержание Flash Memory Duplicator 2.1



























Отзывы:

Похожие инструкции для Flash Memory Duplicator 2.1