28
Vincent
10. INPUT and “IN TAPE“: Input Connections
Here you can enter up to five source devices with
stereo audio line level output. The signal to the
input of the "IN TAPE" connected device can not
exceed the record output "OUT REC" (11).
11. OUT REC: Recording output
Connect here if desired, for example a recording
device. The stereo signal from this output is con-
nected to the output of the currently selected.
Source at one of the "INPUT" connectors are iden-
tical and independent of volume control, tone con-
trol, mute and balance.
12. PRE OUT: Preamp
Over this exit can, if desired, the pre-amplified
stereo sound of the currently selected source can
be passed on to two additional amplifier channels
and an active subwoofer.
13. SPEAKER: Speaker connection terminals
Output jacks with screw terminals for connecting
a pair of speakers. It can be used with speaker
cable with 4mm banana plugs.
14. FUSE: Fuse carrier
This small plastic housing contains the backup
devices. Follow the safety instructions.
15. AC 220-240V: Main socket
Bring the power cord and connect it to the power
supply.
REAR VIEW
15
10
11 10
12
13
14
