SEARCH FOR ERRORS
Symptom
Possible Cause
Countermeasure
The remote control
cannot perform any
functions
No batteries inserted in the remote control,
batteries are not inserted correctly or are
depleted.
The line-of-sight between the remote control
and the unit is obstructed, the range was
exceeded or the hand unit was operated
from a position too far to one side.
The unit is not switched on.
Check and replace the batteries if necessary.
Try to point the remote control at the front of
the unit only when the sight-line is clear, wit-
hin a 7-metre distance and, if possible,
facing the unit.
Switch on the unit.
Humming low fre-
quency noise is
audible, even as
no audio source
is playing back
See section “Net frequency noise” in the
chapter “Tips”.
See section “Net frequency noise” in the
chapter “Tips”.
38
Vincent
38
Vincent
General Specifications
Outputs:
1x stereo RCA analog
AC power connection type:
230 V / 50 Hz AC
Dimensions (W x H x D):
430 x 98 x 345 mm
Weight:
5.5 kg
Colour:
black/silver
FM Tuner
Frequency range:
87 MHz – 108 MHz (50 kHz steps)
Sensitivity:
12 dBµ mono
Frequency Response:
40 Hz - 12 kHz, +1 dB/-1,5 dB
Channel Separation:
> 30 dB (1 kHz)
Total Harmonic Distortion (1 kHz):
mono: 0,8%, stereo: 0,9%
Signal to noise ratio:
mono: 62 dB, stereo: 60 dB
Antenna input:
75
Ω
AM Tuner
Frequency range:
522 kHz -1611 kHz (steps of 9 kHz)
Sensitivity:
55 dBµ/m
Total Harmonic Distortion (1 kHz):
2% at 30% mod.
Signal to noise ratio:
38 dB at 30% mod.
Antenna input:
Frame antenna or outdoor antenna
TECHNICAL SPECIFICATIONS
STU-400 Korr_4_Bedienungsanleitung 09.03.12 16:53 Seite 38
