ED12DSS User Manual
17
Maintenance
Proper care and maintenance of the
ED12DSS
should be taken as with any sensitive electronic
instrument.
There are no user-serviceable parts on the
ED12DSS
except for F2.
Although the stability of the drive voltage is checked and calibrated prior to shipment, it may become
necessary to make some minor adjustments to the operating systems of the
ED12DSS
over time.
It is highly recommended that if a problem is suspected with the unit that it be returned to the factory for
checkout, proper adjustments and calibration. Failure to do this may damage the unit’s circuitry and/or
functionality and will void the factory warranty.
Inspection
Inspect the
ED12DSS
for damage, wear, and missing parts. If the unit appears to show signs of damage,
it should be checked thoroughly to verify correct operation and performance. If damage is suspected,
please return the unit to the factory for repair – there are no user-serviceable parts on the board.
If there is a significant build-up of dust or other material, follow the cleaning procedure below.
Cleaning Procedure
Do not use any tools to brush or scrape away accumulated materials.
Do not use any liquids to clean the board.
Simply use low-pressure air to blow away any dust.
There is no other cleaning required.
