vimec V65 B.I. Скачать руководство пользователя страница 14

Страница: 14 / 85

7502040

b) Power supply

The power supply is 220 V~ input from the mains and

27 VDC as output on the busbar or at the charging

stations.
The battery on the lift is at 24 VDC.
All power and auxiliary circuits are supplied at 24

VDC.

c) Controls

All controls are of hold-to-run type

(the lift stops as soon as the finger is removed from

the button).

All the control panels (on the lift and at the floors) are

enabled by a removable key (no-one can use the lift

unless the key is inserted).

WARNING: Do not use the lift if the controls are

no longer operating on the hold-to-run principle.

d) Operation by hand

The lift can always be operated by hand to bring the

passenger to the floor in the event of a system failure

or power blackout.

e) Non-reversible drive

The spiral worm reduction gear ensures that the lift

cannot descend under its own weight, and ensures a

smooth stop.

f) Motor brake

The electric brake fitted on the motor ensures quick,

stable stopping.

Emergency stop button

The lift is fitted with a red emergency STOP but-

ton (Fig. 2/e) which cuts out all lift movement when

pressed.

To restore operation of the lift, turn the emergency but-

ton 45° clockwise.

WARNING: Check operation of the emergency

STOP button every month. If the STOP button does

not cut out all lift movements, DO NOT USE the lift !!

Call in an authorised VIMEC technician at once.

WARNING: If the lift is to be out of use for

a long time or the power supply is disconnected,

turn the key (Fig. 18/a) to OFF so that the batteries

do not discharge.
On machines without on-off key, this operation is

not necessary (the lift switches itself off automa-

tically after 2 hours

if it is left off the charging station

or in the event of a mains power failure).

WARNING: If the stairlift is not used for a

long period of time, connect the power supply to
the mains for at least 12 hours every month to keep
the batteries charged.

FIG.18

FIG.19

FIG.20

Содержание V65 B.I.






















































































Результаты поиска

Содержание V65 B.I.

Отзывы:

Похожие инструкции для V65 B.I.

Бренды по названию

Популярные бренды

vimec V65 B.I., Оригинальное руководство пользователя

Результаты поиска

Содержание V65 B.I.

Отзывы:

Похожие инструкции для V65 B.I.

Бренды по названию

Популярные бренды