manualshive.com logo in svg

vimec V65 B.I., Оригинальное руководство пользователя


Поделиться
Скачать
background image

3

7502040

ENSURING SAFETY AT WORK

WARNING

This symbol highlights some essential safety instructions

Compliance with these instructions does not mean that the others can be ignored.

Read this manual carefully before installing, starting up, using and maintaining the lift.

The most important factor in preventing accidents is care and attention when using the lift.

Comply with the information provided on the signs of all kinds applied to the lift.

Replace damaged signs immediately.

All work on the lift except for normal operating procedures must be carried out by professionals. 

Comply with the skill levels specified for the various procedures, symbolised as follows:

 

 

O

 

Trained operative

 

 

TO

 

Trained operative with specific skill

 

 

SO

 

Skilled operative authorised by the manufacturer

The lift must always be operated by an ADULT familiar with all the operating functions and precautions 

described in this manual.

CONTENTS OF THE MANUAL

 

1.  

 Unit and manufacturer identification   

 

 

 

 

Page  04 

 

2.  

 After-Sales Service   

 

 

 

 

 

 

Page  04 

 

3.   

Description of unit   

 

 

 

 

 

 

Page  05 

 

4.   

Technical data 

 

 

 

 

 

 

 

Page  08

 

5.   

Intended and improper uses  

 

 

 

 

 

Page  09 

 

 

6.   

Preparing the lift for operation 

 

 

 

 

 

Page  09

   
   

7.  

Correct use of the stairlift in independent arm and retractable arm versions 

Page  10

 

             8.   

Safety systems 

 

 

 

 

 

 

 

Page  13

 

 

9.   

Maintenance 

 

 

 

 

 

 

 

Page  15

 

 

10.  

Electrical wiring diagrams   

 

 

 

 

 

Page  17

 

 

11.  

Vibration – Airborne noise levels 

 

 

 

 

 

Page  17

 

 

12.  

Information on the disposal of materials and unit parts 

 

 

Page  17

USE AND MAINTENANCE

Содержание V65 B.I.






















































































Отзывы:

Нет отзывов

Похожие инструкции для V65 B.I.

Бренды по названию

Популярные бренды

Загрузить еще бренды