10 - ITALIANO
6. CONFIGURAZIONE DISPOSITIVI
Permette di stabilire la comunicazione tra il cronotermostato prima-
rio e i vari dispositivi installati nel sistema attraverso la definizione di
una tabella per la configurazione.
ATTENZIONE!
Prima di procedere alla configurazione è necessario installare
tutti i dispositivi nella loro posizione definitiva ed evitare suc-
cessivi riposizionamenti.
La configurazione deve essere eseguita da cronotermostato prima-
rio (ID logico 01) in prossimità dei singoli dispositivi che si intende
programmare nel sistema secondo le fasi che seguono:
Apprendimento dispositivi su cronotermostato primario
Duplicazione cronotermostato primario verso secondari
Associazione cronotermostati - relè
Tempo di ricezione scaduto
Raggiunto limite massimo dispositivi programmabili
Procedura di duplicazione cronotermostato fallita
Tempo di ripristino impostazioni di fabbrica scaduto
Richiesta versione firmware fallita
Display
Descrizione
Nota
. Se il problema persiste o si verifica frequentemente, è con-
sigliabile riposizionare il cronotermostato in una zona con migliore
ricezione radio (vedere il paragrafo 4.5).
5.4 Messaggi di errore
Il cronotermostato, a seguito di un malfunzionamento, segnala il
problema attraverso la visualizzazione sul display della scritta
seguita da un codice che identifica la causa del problema.