Vimar ELVOX TAB 7559, Быстрое руководство

Страница: 10 / 40

10
TAB: 7559
EN
Fig. 5
C (Access Menu
configuration)
P/A (Answer / End call /
Call to switchboard)
T4 (Stair light / Actuator
menu)
Lock
T2 (AUX2 / Intercom
menu)
T1
(Self-start)
T3 (Ringtone mute / Mute
microphone)
In the subsequent sections of this document the touch keys
are designated as shown in the figure (Fig. 5):
At rest, none of the buttons perform the touch func-
tion, but must be pressed for longer (around 0.4 s): this
prevents the accidental activation of commands. Unless
specifically disabled, the recognition notice is given by
acoustic signalling.
Keys
T1..T4 have two operating contexts:
• Operators
• Intercom
In the Drives context, keys T1..T4 have a default (when not
programmed), as indicated in the following figure (Table
1), along with the default icons:. They can be programmed
from the installer menu or using SaveProg.
Table 1
KEY ICON MEANING
T1 Self-start
T2 Aux 2
T3 F2 last outdoor unit
T4 Aux 1
Key functions
In the Intercom context keys T1..T4 have no default
configuration.
T3 has the function of
ringtone mute
/ mute microphone.
By default, the LOCK key controls the lock of the last
outdoor unit to make a call or the outdoor unit for which
self-start procedure was performed.
In standby mode, the screen is completely switched off.
(In the method described above), by activating any one of
the keys T1..T4 and LOCK by default the function is
performed without switching on the display unless the
function has to do so in order to be performed, such as
self-start.