Vimar ELVOX TAB 40507 Скачать руководство пользователя страница 17

Страница: 17 / 110

TAB: 40507

CALL FUNCTIONS

A video entryphone call originating from an entry panel has priority over any other operation in progress (e.g.

setting the display background), including intercom calls between two internal units. The video entryphone call is

presented at the maximum level of quality at which the 7” EVO video entryphone can operate in communication

via 2-wire bus. When a call is in progress, the screen presents two lateral bars containing the buttons for the

most commonly used functions.

Receiving a video call from an entry panel

When a call is received from an entry panel equipped with a camera, the screen of the 7” EVO video entryphone

displays the video image transmitted via the 2-wire bus.

accepts the call and starts communication. Pressing the button

printed on the monitor casing

has the same effect.

ends or rejects the call. You can also reject the call before answering by pressing the button

printed on the monitor casing.

, printed on the monitor casing, opens the door. Pressing this button when there is no call in progress

opens the lock of the last door to be opened.

Operation of the LEDs

The physical buttons printed on the monitor casing are equipped with LEDs for backlighting.

The LED of the lock button

flashes when at least one door in the system is open. The same notification is

presented on the right-hand side of the touch screen display and on the top bar (same icon).

The LED of the talk/listen button

flashes when there is at least one voicemail message that has not been

listened to.

During a connection, the name associated with the entry panel or internal unit from which the call was made is

displayed at the top left corner of the screen along with the date/time of the call.

microphone enabled icon. Pressing this button disables audio transmission to the entry panel and

disables the microphone. The icon changes to

microphone disabled icon. Pressing this button enables audio transmission to the entry panel and enables

Содержание ELVOX TAB 40507















































































































Результаты поиска

Содержание ELVOX TAB 40507

Отзывы:

Похожие инструкции для ELVOX TAB 40507

Бренды по названию

Популярные бренды

Vimar ELVOX TAB 40507, Руководство пользователя

Результаты поиска

Содержание ELVOX TAB 40507

Отзывы:

Похожие инструкции для ELVOX TAB 40507

Бренды по названию

Популярные бренды