Vimar ELVOX RS14, Инструкция по установке и эксплуатации

Страница: 18 / 88

16
2.1 Connection of ELVOX flashing light type ELA3 (supply voltage 230V) to courtesy light terminal
Important!
To prevent damaging the insulating sheath of the electrical cable, always lay the cable so that it is not in contact with the courtesy light bulb.
• Remove the courtesy light guard.
• Connect the flashing light.
• Set the desired function (level 3, menu 1).
• Refit the courtesy light guard.
L1 N
Terminal block at rear of motor
3. Initial operation
3.1 Connecting the operator system
3.2 Overview of the control unit
LED displays
1 Photocell (only lights up if the photocell beam is interrupted)
2 Door OPEN position
3 Intermediate position
4 Door CLOSED position
5 Check reference point
6 Has no function
7 Impulse signal (remote control, external control elements)
8 Operation
Operating elements:
A (+) button (e.g. to drive the door to the OPEN position or to increase parameters when programming)
B (-) button (e.g. to drive the door to the CLOSED position or to decrease parameters when programming)
C (P) button (e.g. to switch to programming mode or to save parameters)
EN