Vimar ELVOX 40636, Инструкция

Страница: 4 / 16

o 2 A cosf 0.6 - Motor
The 2 relay outputs are separated from each other by main
insulation at 250 V~ and not by double insulation; because of
this, for example, do not connect a SELV circuit to an output
that is adjacent to another one that is connected to the 230
V~ power supply.
The instruction manual is downloadable from the site www.
vimar.com
Installation rules
Installation should be carried out observing current installa-
tion regulations for electrical systems in the Country where
the products are installed.
Ensure clearance around the appliance so there is sufficient
ventilation.
There must be no dripping or splashes of water on the ap-
pliance.
WARNING: To prevent injury, the appliance must be secured
to the wall as described in the installation instructions.
Above the power supply there must be a bipolar circuit break-
er that is easily accessible with a contact gap of at least 3
mm.
Conformity
LV directive
EMC directive
Standards EN 60065, EN 61000-6-1, EN 61000-6-3.
WEEE - Information for users
If the crossed-out bin symbol appears on the equip-
ment or packaging, this means the product must not
be included with other general waste at the end of
its working life. The user must take the worn product to a
sorted waste center, or return it to the retailer when purchas-
ing a new one. Products for disposal can be consigned free
of charge (without any new purchase obligation) to retailers
with a sales area of at least 400m 2 , if they measure less than
25cm. An efficient sorted waste collection for the environ -
mentally friendly disposal of the used device, or its subse-
quent recycling, helps avoid the potential negative effects on
the environment and people’s health, and encourages the re-
use and/or recycling of the construction materials.
This product was developed using FreeRTOS
TM
software -
http://www.freertos.org/
EN
4
40636