5
TESTING:
Replace the cover on the switch box by turning the key. Check the placement of the wires inside the box and secure the cover by fastening the screws.
Test the switch by making sure that the lock opens and closes correctly .
To check the release mechanism, lift the seal on the cover and turn the lock to open the release key input (Fig. 6). Insert the key and turn clockwise to release
the electric braking unit.
IMPORTANT SAFETY INSTRUCTIONS:
Only use when necessary and do not allow children to play with the control device.Keep an eye on the automatic device when in operation, keeping people
away from the area until the operation has been completed.
Make sure that the automatic device and relative safety systems are in good working order.
Use the special release key provided to activate the manual release mechanism.
Contact the installer immediately if you are unable to operate the device or observe any anomalies.
MAINTENANCE
The device does not require maintenance.
EN
Entrance of
release key
Gasket
Connector
Earth
Phase
Phase
Omnipolar
device
Earth
wiring diagram
Earth
Phase
Phase
Fig. 5
Fig. 6
Fig. 7
b
Fig. 8
a
